Description
Processing instructions for the water transfer printing film Carbon Black SM Design PI-002 in various widths:
For the Carbon Black SM Design PI-002 film, the water in the basin should have a temperature of 25-27°C. The soaking time is 60 seconds. There are two options before placing the film in the water: 1. Make cuts all around the film at a 45° angle, spaced 2-3 cm apart. At the end of the 60-second soaking time, spray the film with activator and immerse the component immediately. Pre-coating or priming is required for all parts not made of ABS plastic.
Product description for Carbon Black SM Design PI-002 in various widths:
The PI-002 water transfer printing film is ideal for decorating/patterning complex parts. It's easy and simple to learn to use, and coating is possible even without a dipper/machine. TOP QUALITY from WT-DIRECT GmbH. If you would like to order larger quantities, simply increase the required number of meters in the order window.
PLEASE NOTE regarding Carbon Black Design SM PI-002: The actual film may look different than the photo in our shop. A result like the one in the photo can only be achieved if the part to be treated has been pre-painted in the correct RAL color. Our films are wound on rolls. We recommend using our base coat on parts that need to be painted, as otherwise adhesion problems may occur.
